More than sensors+automation
Search

JUMO dTRANS T06 Ex – Multifunctional Four-Wire Transmitter in Mounting Rail Case with SIL and Ex Approval (707075)

Propiedades

• Universal input for a large number of sensors and standard signals
• SIL 2/SIL 3 according to DIN EN 61508 and PL c/d according to ISO 13849
• Reliable operation through sensor monitoring and hardware error detection
• ATEX and IECEx approval
• Customer-specific linearization
• Intuitive operation and configuration on the device or via USB interface with setup program
• RS485 interface (option)
• Intelligent additional functions such as min./max. drag indicator, operating hours counter, and output simulation
• Connection diagram can be viewed in the LCD display

Aplicaciones

  • Process industry
  • Industrial furnace construction and thermal industry
  • Plant construction and mechanical engineering
  • Food industry
  • Pharmaceutical industry
  • Refrigeration plants
  • Heating and air conditioning
  • Plastics industry
  • Renewable energy
  • Water and Wastewater

Descripción

The JUMO dTRANS T06 Ex transmitter, type 707075, according to DIN EN 61508 SIL 2 is intended to be installed on a mounting rail. It is used to acquire the temperature using an RTD temperature probe or thermocouple. The connection of the sensor is made with RTD temperature probe in two-wire, three-wire, or four-wire connection technology. Furthermore, the measuring input allows the connection of resistance transmitters in two-wire, three-wire, or four-wire connection technology, the acquisition of voltage signals (0 to 10 V and -100 to +1100 mV), and the current standard signals 0(4) to 20 mA. The output signal is galvanically isolated from the intrinsically safe sensor circuit. Depending on the measurement input, different linearization variants (linear, temperature-linear, customer-specific, etc.) are possible. Output signal: variants 0(4) to 20 mA and, alternatively, 0 to 10 V are available. The functionality of the JUMO dTRANS T06 Ex, type 707075, can be expanded through the RS485 interface option. A graphic display is used to visualize the measured values. The operating status is signaled optically using a 2-color LED (red/green). Smooth operation is indicated through a permanent green LED; a malfunction status is indicated through a red LED. The sensor type, measuring range, linearization, output signal, limit values, etc. can be configured using a PC and the setup program. For this purpose, the device can be connected to the PC via a micro-USB socket and a corresponding USB cable. Alternatively, configuration is also possible via 4 keys. The housing has a design width of 22.5 mm and is designed to be mounted on a DIN rail measuring 35 × 7.5 mm according to EN 60715. The electrical connection is established via screw terminals for conductor cross sections from 0.2 to 2.5 mm². The device meets the requirements of DIN EN 61508 SIL 2. The systematic capability (SC 3) of the hardware and software corresponds to the Safety Integrity Level (SIL 3). Depending on the architecture, SIL 2 or PL c can be achieved for HFT=0 (single device) and SIL 3 or PLd for HFT=1 (2 devices).

Documentación
Aclaración de conformidad / White Paper
Software

Nº de pieza Descripción de producto Precio de la versión completa
00668006

SETUP Programm JUMO dTRANS T06 LCD/Ex

Descargar  349.exe (Versión de prueba 30 días)  (58.7 MB)

Información adicional
Consultar precio
Accesorios

Artículo accesorio

Nº de pieza Descripción de producto Precio
Cable USB enchufe A en enchufe Micro-B- 3m lg Consultar precio
Soporte enroscable para riel de soporte Consultar precio