JUMO dTRANS T06 – Multifunctional Four-Wire Transmitter (707070)
- High level of galvanic signal isolation
- Customer-specific linearization
- Output simulation
- Min. and max. drag indicator function
- Operating hours counter
- Convenient setup configuration (USB powered)
- UL approval
- Process industry
- Industrial furnace construction and thermal industry
- Plant construction and mechanical engineering
- Food industry
- Pharmaceutical industry
- Refrigeration plants
- Heating and air conditioning
- Plastics industry
- Renewable energy
- Water and wastewater
The dTRANS T06 Junior (type 707070) transmitter acquires the temperature through an RTD temperature probe with 2-wire, 3-wire, or 4-wire circuit or thermocouple. Resistance transmitters with a 3-wire circuit as well as DC voltage signals in the range from 0 to 1 V can also be connected for the measurement conversion. The output signal is galvanically isolated from the measurement input and the voltage supply (triple isolation). Depending on the measurement input, different linearization variants (linear, temperature-linear, or customer-specific) are possible. The variants 0(4) to 20 mA or 0(2) to 10 V are available as the output signal.
Process variables such as temperature or pressure are reliably emitted at the analog output and monitored for out of range occurrences. If a malfunction occurs the transmitter sends a defined output signal according to the recommendation of NAMUR NE 43, which downstream systems can recognize. The operating statuses are signaled optically using a 2-color LED (red, green). Smooth operation is indicated through a permanent green LED; malfunction status is indicated through a permanent red LED.
The transmitter is configured using the convenient PC setup program without connecting an additional voltage supply (USB powered).
|Nº de pieza||Descripción de producto||Precio de la versión completa|
Setup JUMO dTRANS T06 JuniorInformación adicional